葉先揚，早年畢業于臺灣成功大學，后赴美國留學，分別在布朗大學、哥倫比亞大學和南加州大學取得了應用數學碩士、工程力學碩士和結構力學博士學位。 1986葉先揚博士加入加州州立大學長灘分校機械工程系，現為該系教授。葉教授還曾經擔任過美國核電工程顧問公司的結構及核能工程師、美國太空總署(NASA)資深工程師、美國麥道飛機公司特約顧問等職務。葉教授的研究興趣主要包括復合材料力學、斷裂和損傷力學、結構和機械部件失效分析和設計。

1.H-Y Yeh, J.J. Lee, D.Y.T. Yang and H-L Yeh (2004). "Study of multi-row highly loaded bolt joints in composite wing structure,"AIAA Journal of Aircraft, Vol. 41, No. 2, pp. 380-385.

2.H-Y Yeh, J.J. Lee, D.Y.T. Yang and H-L Yeh (2004). "Study of stitched and unstitched composite panels under shear loading,"AIAA Journal of Aircraft, Vol. 41, No. 2, pp. 386-392.

3.X.F. Yao, W. Xu, M.Q. Xu, G.C. Jin and H-Y Yeh (2004). "Causic study on stress singularities in laminated composites under concentrated loads,"International Journal of Solids and Structures, Vol. 41, pp. 3383-3393.

4.H-Y Yeh, R.K. Berryhill and H-L Yeh (2004). "Analytical Damage Zone Size Predictions for Notched Laminated Composites,"Journal of Reinforced Plastics and Composites, Vol. 23, No. 18, pp. 2081-2100.

5.Juan Cepeda-Rizo, H-Y Yeh and N.T. Teneketger (2005). "Characterization and Modeling of Printed Wiring Board Warpage and its Effect on LGA Separable Interconnects." To appear in theASME Journal of Electronic Packaging, Vol. 127, Issue 2, pp. 185-188.

6.Juan Cepeda-Rizo and H-Y Yeh (2005). "Creep Prediction of a Printed Wiring Board for Separable Land Grid Array Connector,"ASME Journal of Electronic Packaging, Vol. 127, Issue 2, pp. 185-188.

7.H-Y Yeh and D. Tandjung (2005). "Mixed Mode Fracture Analysis of the Lap Shear Specimen Test per ASTM D1002,"Journal of Reinforced Plastics and Composites, Vol. 24, No. 8, pp. 839-853.

8.X.F. Yao, H-Y Yeh and H.P. Zhao (2005). "Dynamic Response and Fracture Characterization of Polymer/Clay Nanocomposites with Mode-I Crack,"Journal of Composite Materials, Vol. 39, No. 16, pp. 1487-1496.

9.X.F. Yao, H-Y Yeh and W. Xu (2005). "Dynamic Initiation and Propagation Behavior of Subinterfacial Cracks in PMMA/Aluminum Bimaterial System,"Fatigue and Fracture of Engineering Materials and Structures, Vol. 28, No. 12, pp. 1191-1198.

10.X.F. Yao, H-Y Yeh and W. Xu (2006). "Fracture Investigation at V-Notch Tip Using Coherent Gradient Sensing (CGS),"International Journal of Solids and Structures, Vol. 43, No. 5, pp. 1189-2000.

11.H-Y Yeh, H.N. Rashid and H-L Yeh (2006). "Effect of T-stress on Damage Zone Size Predictions of Notched Laminated Composites,"Journal of Reinforced Plastics and Composites, Vol. 25, No. 1, pp. 89-98.

12.X.F. Yao, H-Y Yeh, D. Zhou and Y.H. Zhang (2006). "The Structural Characterization and Properties of SiO2/Epoxy Nanocomposite,"Journal of Composite Materials, Vol. 40, No. 4, pp. 371-381.

13.X.F. Yao, H.P. Zhao and H-Y Yeh (2006). "Micro/nanoscopic characterizations of Epoxy-silica nanocomposites,"Journal of Reinforced Plastics and Composites, Vol. 25, No. 2, pp. 189-196.

14.Y. Yin, H-Y Yeh and J. Yin (2006). "Stability similarities between shells, cells and nano carbon tubes,"IEEE Proceedings on Nanobiotechnology, Vol. 153, No. 1, pp. 7-10.

15.X.F. Yao, W. Xu, and H.-Y. Yeh (2007). "Investigation of crack tip evolution in functionally graded materials using optical caustics,"Polymer Testing, Vol. 26, No. 1, pp. 122-131.

16.H.M. Xu, X.F. Yao, X.Q. Feng, and H.-Y. Yeh (2007). "Anti-plane Yoffe moving crack problem in isotropic functionally graded materials,"Journal of Reinforced Plastics and Composites, Vol. 26, No. 2, pp. 127-137.

17.H.-Y. Yeh, R.M. Le, and H.-L. Yeh (2007). "Buckling of a metal-matrix composite plate with a square hole,"Journal of Reinforced Plastics and Composites, Vol. 26, No. 5, pp. 525-540.

18.H.-Y. Yeh, C. Kornak, and H.-L. Yeh (2007). "Torsional Failure in Rectangular Composite Plates,"Journal of Reinforced Plastics and Composites, Vol. 26, No. 11, pp. 1091-1099.

19.X.F. Yao, D.L. Liu, and H.-Y. Yeh (2007). "Mechanical properties and gradient variations of polymers under ultraviolet radiation,"Journal of Applied Polymer Science, Vol. 106, No. 5, pp. 3253-3258.

20.H.M. Xu, X.F. Yao, X.O. Feng, and H.-Y. Yeh (2008). "Fundamental solution of a power law orthotropic and half-space functionally graded material under line loads,"Composite Science and Technology, Vol. 68, No. 1, pp. 27-34.

21.H.M. Xu, X.F. Yao, X.O. Feng, and H.-Y. Yeh (2008). "Dynamic stress intensity factors of a semi-infinite crack in an orthotropic functionally graded material,"Mechanics of Materials, Vol. 40, No. 1, pp. 37-47.

22.X.F. Yao, D. Zhou, H.-Y. Yeh (2008). "Macro/microscopic fracture characterizations of SiO2/epoxy nanocomposites,"Aerospace Science and Technology, Vol. 12, Issue 3, April 2008, pp. 223-230.

23.X.F. Yao, W. Xu, S.L. Bai, H.-Y. Yeh (2008). "Caustics analysis of the crack initiation and propagation of graded materials,"Composites Science and Technology, Vol. 68, Issues 3-4, March 2008, pp. 953-962.

24H.-Y. Yeh, K.S. Murphy, and H.-L. Yeh (2008). "An examination of failure criteria for notched orthotropic ceramix matrix composite laminates,"Journal of Reinforced Plastics and Composites, Vol. 27, No. 8, pp. 835-850.