1992.3-1995.11哈爾濱工業大學機械學博士

1989.9-1992.3 哈爾濱工業大學機械學碩士

1985.9-1989.7大慶石油學院礦業機械學士

2007.12至今大連理工大學機械工程學院教授

1998.10-2007.12 大連理工大學機械工程學院副教授

2014.1-2014.12 秘書長(中國機械工程學會生產工程分會光整加工專業委員會)

2009.1-2010.12 秘書長(中國機械工程學會生產工程分會光整加工專業委員會)

2005.1-2008.12 副秘書長(中國機械工程學會生產工程分會光整加工專業委員會)

2013.1-2013.12 秘書長(中國機械工程學會生產工程分會光整加工專業委員會)

主要研究方向是精密與超精密加工技術、難加工材料高效加工技術、特種加工及其控制技術。主持國家973計劃子課題2項、國家自然科學基金委重大研究計劃培育項目1項、國家自然科學基金面上項目2項、遼寧省科學基金2項、GF預研項目2項、大連市科技計劃項目1項。作為主要研究人員參加完成國家自然科學基金重大項目、重點項目各1項、國家自然科學基金面上項目2項，以及多項國防預研和橫向協作項目。發表學術論文60余篇，其中SCI、EI檢索40余篇，申報發明專利14項。獲得教育部技術發明一等獎1項，航天部科技進步三等獎2項。

精密與超精密加工技術

特種加工及其控制技術

難加工材料高效加工

1. Zewei Yuan, Zhuji Jin, Renke Kang andQuan Wen.Tribochemical polishing CVD diamond film with FeNiCr alloy polishingplate prepared by MA-HPS technique. Diamond & Related Materials, 2012, 21, pp.50-57.

2. Zewei Yuan, Zhuji Jin, Quan Wen and KunWang. Polishing CVD diamond wafer by compound methods. International Journal ofMachining and Machinability of Materials, 2012.1.

3. Z.J. Jin, Z.W. Yuan, Q. Li and K.Wang. TribologicalAspects of Chemical Mechanical Polishing Diamond surfaces. Key EngineeringMaterials, 2011,325, pp. 464-469.

4.Heng Zhen Dai, ZhuJi Jin, Shang Gao, Z.C. Tao. Research on the Chemical-Mechanical Grinding (CMG)Tools for Al2O3 Ceramic. Advanced Materials Research,2011, 325, pp 270-275.,

5. Wei Si Li, DongMing Guo, Zhu Ji Jin, Zhe Wang, Ze Wei Yuan. Effects of High DielectricConstant Abrasives on ECMP, Applied Mechanics and Materials, 2011, 121-126, pp3263-3267

6. 苑澤偉, 金洙吉, 王坤, 溫泉.CVD金剛石膜高效超精密拋光技術, 納米技術與精密工程, 2011, 9(5), 451-458.

7.周平, 郭東明, 康仁科, 金洙吉. 多級粗糙間隙內的兩相微流動數值模擬, 機械工程學報, 2011,47(15), 83-88.

8. 周平, 郭東明, 金洙吉, 康仁科. 多級粗糙表面對拋光液微流動影響的數值分析, 機械工程學報, 2011, 47(9),169-174.

9. Guo Dongming, XuChi, Kang Renke and Jin Zhuji. Model analysis and experimental investigation ofthe friction torque during the CMP process, Journal of Semiconductors, 2011,32(3), 036002.

10. Wang Cailing, KangRenke, Jinzhuji and Guo Dongming. Effects of the reciprocating parameters ofthe carrier on material removal rate and non-uniformity in CMP. Journal ofSemiconductors, 2010, 31(12), 126001.

11. Xu Chi, GuoDongming, Jin Zhuji, Kang Renke. A signal processing method for thefriction-based endpoint detection system of a CMP process. Journal ofSemiconductors, 2010, 31(12), 126002.

12. 王彩玲, 康仁科, 金洙吉. 一種用于化學機械拋光的加壓裝置設計研究. 中國機械工程, 2010, 21(7),839-842.

13. 劉瑞鴻, 郭東明, 金洙吉, 康仁科. 摩擦化學反應活化能在SiO2-CMP中的作用, 納米技術與精密工程, 2010, 8(3), 275-280.

14. Jin ZJ, Yuan ZW, Kang RK and Dong BX.Fabrication and Characterization of FeNiCr Matrix-matrix-TiC composite forpolishing CVD diamond film. Journal of Material Science and Technology, 2009,25(3), pp 319-324.

15. Z.J.Jin, Z.W.Yuan, R.K.Kang andB.X.Dong. Study on two kinds of grinding wheels for dynamic friction polishingof CVD diamond film, Key Engineering Materials, 2009, 389-390, pp 217-222.

16. MA Xingwei, JINZhuji, YAN Shi, XU Jiujun. Effect of La2O3 onmicrostructure and high-temperature wear property of hot-press sintering FeAlintermetallic compound. JOURNAL OF RARE EARTHS, 2009, 27(6), pp 1031-1036.

17. 郭曉光, 郭東明, 康仁科, 金洙吉. 機群系統上單晶硅磨削過程分子動力學仿真并行化研究. 系統仿真學報, 2009, (10),2850-2854.

18. Z. W. Yuan, Z. J. Jin, B. X. Dong andR. K. Kang. Polishing of free-standing CVD diamond films by the combination ofEDM and CMP. Advanced Materials Research, 2008, 53-54, pp 111-118.

19. Z.J. Jin, X.W. Ma and Z.W. Yuan. Thehigh-efficient low-cost wheel-grinding technology for CVD diamond films,Advanced Materials Research, 2007, 24-25, pp 295-302.

20. F.W. Huo, Z.J.Jin,R.K.Kang, D.M.Guo. A method for grinding mode indentification in grinding ofsilicon wafers. Adwance Materials Research. 2007, 24-25, pp 255-230.

21. F.W. Huo, Z.J.Jin,et al. Experimental investigation of brittle to ductile transition of singlecrystal silicon by single grain grinding. Key Engineering Materials. 2007, 329,pp 433-438.

22. 霍鳳偉，金洙吉，康仁科，郭東明. 金剛石砂輪形貌測量中的磨粒識別研究. 大連理工大學學報, 2007, 47（3）, 358-362.

23. J.Y.Liu, Z.J.Jin,D.M.Guo, R.K. Kang. Effects of suspending abrasives on the lubricationproperties of slurry in chemical mechanical polishing of silicion wafer. KeyEngineering Materials, 2006, 304-305, pp 359-363.

24. J.Y.Liu, D.M.Guo,Z.J.Jin, R.K. Kang. A suspeding abrasives and porous pad model for the analysisof lubrication in chemical mechanical polishing, Key Engineering Materials,2006, 315-316. pp 775-778.

[1]萬策,金洙吉,吳頔,劉作濤,司立坤.大徑厚比銅片的化學機械拋光[J],金剛石與磨料磨具工程,2018,38(3):81-85

[2]孫志明,金洙吉,韓曉龍,范康男,司立坤.釔鋁石榴石晶體的機械拋光工藝[J],金剛石與磨料磨具工程,2018,38(1):73-77

[3]孫晶,程瑋,宋金龍,陸遙,孫延奎,黃柳,劉新,金洙吉.Fabrication of Superhydrophobic Micro Post Array on Aluminum Substrates Using Mask Electrochemical [J],Chinese Journal of Mechanical Engineering,2018,31(1)

[4]牛林,金洙吉,周中正,董志剛,朱祥龍.Study on Electrochemical Effect in Electrochemical Grinding of Tungsten Alloy[A],The 21st International Symposium on Advances in Abrasive Technology,2018

[5]安潤莉,韓曉龍,朱祥龍,金洙吉,白倩,郭東明.Effect of polishing plate properties on YAG crystal disk polishing[A],6th International Conference on Nanomanufacturing,2018

[6]Liu, Jiyu,Liu, Xin,Liu, Shuo,Chen, Faze,Wang, Guansong,Sun, Jin,Song, Jinlong,Huang, Liu,Zheng, Huanxi,Jin, Zhuji.Long-lasting oil wettability patterns fabrication on superoleophobic surfaces by atmospheric pressure DBD plasma jet[J],MICRO & NANO LETTERS,2017,12(12):1000-1005

[7]Liu, Ziai,Zhao, Danyang,Wang, Xuyue,Song, Jinlong,Roy, Tamal,Li, Shude,Liu, Jiyu,Huang, Liu,Liu, Xin,Jin, Zhuji.Pouring-type gravity-driven oil-water separation without water bridge[J],MICRO & NANO LETTERS,2017,12(10):744-748

[8]魏東光,金洙吉,姜冠楠.超硬涂層磨削工藝實驗研究[J],精密制造與自動化,2017,2:60-64

[9]張浩然,金洙吉,王紫光,韓曉龍.聚氨酯拋光墊機械拋光釓鎵石榴石晶片[J],金剛石與磨料磨具工程,2017,37(2):26-30

[10]李金元,金洙吉.高純鎢磨削加工試驗研究[J],航空制造技術,2017,6:55-59

[11]Guo, Xiaoguang,Li, Qiang,Liu, Tao,Kang, Renke,Jin, Zhuji,Guo, Dongming.Advances in molecular dynamics simulation of ultra-precision machining of hard and brittle materials[J],FRONTIERS OF MECHANICAL ENGINEERING,2017,12(1,SI):89-98

[12]郭曉光,李洋,翟昌恒,康仁科,金洙吉.單晶硅多次加工時的亞表面損傷仿真分析[J],中國科技論文,2017,12(4):374-378

[13]Huang, Liu,Song, Jinlong,Lu, Yao,Chen, Faze,Liu, Xin,Jin, Zhuji,Zhao, Danyang,Carmalt, Claire J.,Parkin, Ivan P..Superoleophobic surfaces on stainless steel substrates obtained by chemical bath deposition[J],MICRO & NANO LETTERS,2017,12(2):76-81

[14]宋金龍,劉新,金洙吉.A Twice Electrochemical Etching Method to Fabricate Superhydrophobic-Superhydrophilic Patterns for Biomimetic Fog Harvest[J],Scientific Reports,2017,7:8816-8828

[15]金洙吉,謝飛,郭曉光,史雙佶.單晶金剛石切削模具鋼磨損機理的分子動力學仿真[J],納米技術與精密工程,2016,14(6):410-415

[16]Li Z.,Bao Y.,Kang R.K.,Dong Z.G.,Zhou P.,Jin Z.J..An advanced support method of aircraft skin mirror milling - Fluid lubricating support[A],19th International Symposium on Advances in Abrasive Technology, ISAAT 2016,2016,874:469-474

[17]戴恒震,油艷紅,戴智弘,金洙吉.使用霧化液的K9光學玻璃化學機械磨削[J],金剛石與磨料磨具工程,2016,36(4):6-12

[18]Song, Jinlong,Parkin, Ivan P.,Huang, Liu,Lu, Yao,Liu, Xin,Deng, Xu,Yang, Xiaolong,Huang, Shuai,Sun, Jing,Jin, Zhuji.Fabrication of Long-Term Underwater Superoleophobic Al Surfaces and Application on Underwater Lossless Manipulation of Non-Polar Organic Liquids[J],SCIENTIFIC REPORTS,2016,6:31818

[19]郭曉光,劉濤,翟昌恒,苑澤偉,金洙吉,郭東明.過渡金屬作用下的金剛石石墨化機理研究[J],機械工程學報,2016,52(20):23-29

[20]Niu, Fangyong,Wu, Dongjiang,Ma, Guangyi,Wang, Jiangtian,Zhuang, Juan,Jin, Zhuji.Rapid Fabrication of Eutectic Ceramic Structures by Laser Engineered Net Shaping[A],18th CIRP Conference on Electro Physical and Chemical Machining (ISEM),2016,42:91-95

一種高平面度金屬超薄板的加工方法

一種金剛石刀具切削黑色金屬的方法

一種密封環加工預變形力加載夾具及其加載方式

一種脈沖激光填絲增材制造鎳基合金結構的方法

一種核主泵屏蔽套的激光填絲焊接方法

基于分子動力學的鑄造高鉻合金的建模方法

弱剛性構件極端制造集成工藝協調控制及其知識系統研究, 國務院其他部門, 2016/01/01, 進行

高性能激光晶體超精密拋光技術與裝備, 國家科技部 , 2016/07/01, 進行

復雜型面加工的能量定域耦合機理及調控方法, 國家“973”項目 , 2015/01/01, 進行

變槳滑環接觸材料摩擦磨損特性研究, 自選課題, 2015/01/01-2015/06/30, 進行

300mm硅片單面拋光機（CMP）的開發, 2011/01/01-2011/01/01, 完成

電沉積Cu-ZrB2復合材料電極的快速制造技術研究, 省、市、自治區科技項目, 2006/01/01-2008/12/31, 完成