個人簡介
劉明侯,男,中共黨員,1966年7月生,江蘇如東人。1992年研究生畢業于南京航空航天大學動力工程系,2000年于中國科技大學熱科學與能源工程系獲得博士學位,現為中國科技大學熱科學與能源工程系教授/博導。主要從事微動力系統,熱流體測試技術研究,在國際國內重要刊物及國際學術會議上發表論文90余篇,F(xiàn)任國家教育部高等學校熱工課程教學指導委員會委員,中國科學技術大學工程科學學院院長助理。
個人經歷
1985,9-1989,7:南京航空航天大學動力工程系攻讀學士學位;
1989,9-1992,5:南京航空航天大學動力工程系攻讀碩士學位;
1992,7- 今。褐袊茖W(xué)技術大學熱科學與能源工程系講師、副教授、教授。
其中
1998,2-1999,1;1999,10-2000,3;2001,5-2002,3在香港理工大學機械工程系訪問研究
2000年1月聘為副教授; 2010年6月聘為教授
2000年10月于中國科學技術大學熱科學與能源工程系獲得工學博士學位
研究方向
1, 高熱流密度電子元器件散熱技術
采用噴霧冷卻,微槽道換熱,小槽道填充多孔介質等技術強化高熱流密度電子元器件散熱。
2, 多孔介質燃燒
多孔介質內流動、傳熱與燃燒的規律,多孔介質火焰駐定技術。
3, 微動力系統;微尺度流動、傳熱與燃燒
主要研究微推力器及其推力測試技術;微、小空間催化燃燒技術;微通道內流動與傳熱強化技術等
獲獎或榮譽
2010年安徽省科技進步二等獎(排名第二);
2010年全國大學生節能減排社會實踐與科技競賽指導教師一等獎;
2010年“王寬誠育才獎”一等獎;
2009年楊亞校友育才獎;
2002年“王寬誠育才獎”二等獎;
代表論著
1. Minghou Liu, Dong Liu, Sheng Xu, Yiliang Chen, Experimental study on liquid flow and heat transfer in micro square pin fin heat sink, International Journal of Heat and Mass Transfer, 54,5602-5611,2011
2. Dong Liu, Minghou Liu, Dan Xing, Sheng Xu, Flow and Heat Transfer Performance of a Mini-Channel Radiator with Cylinder Disturbed Flow, Experimental Thermal and Fluid Science, 35(6):1202-1208, 2011.
3. XuKan, Liu Minghou, Zhao Pinghui, Stability of lean Combustion in mini-scale porous media combustor with heat recuperation, Chemical Engineering and Processing: Process Intensification, 50,608-613.2011.
4. Yaqing Wang, Minghou Liu, Dong Liu, Kan Xu. Heat Flux Correlation for Spray Cooling In the Non-boiling Regime [J]. Heat Transfer Engineering 32(11-12):1075-1081, 2011.
5. Wang Yaqing, Liu Minghou, Liu Dong, Xu Kan, Experimental Study on the Effects of Spray Inclination of Water Spray Cooling Performance in Non-boiling Regime, Experimental Thermal and Fluid Science, 34, 933-942, 2010.
6.王琪珉,劉明侯,秦豐華,微機電系統工程基礎,中國科學技術大學出版社,2010,1.
7. Minghou Liu, Chen Xie, Xiangfeng Zhang, Yiliang Chen, Numerical Simulation on Micromixer based on Synthetic Jet, Acta Mechanica Sinica, 24(6), 629-636, 2008.
8. Minghou Liu,Xianfeng Zhang,Genxuan Zhang,Yiliang Chen, Study on Micronozzle Flow and Propulsion Performance Using DSMC and Continuum methods, Acta Mechanica Sinica, 22(5) 2006 409-416.
9.Zhang Genxuan Liu Minghou, Zhang Xianfeng, Ye taohong, Chenyiliang, Wang lu, Continuum-based Slip model and its Validity for Micro-channel Flows, Chinese Science Bulletin, 51(9), 2006,may, pp1130-1137.
10. Genxuan zhang, Xiaodan Cai, Minghou Liu, Boying Lin, Yiliang Chen, Lu Wang, Characteristics analysis of low-velocity gas filtration combustion in an inert packed bed, Combustion Theory and Modelling, 10(4): 683-700 2006.
11. T. L. Chan, Y. Zhou, M.H. Liu, C.W. Leung, Mean flow and turbulence measurements of the impingement wall jet on a semi-circular convex surface, Experiments in fluids, 34(1)(2003), pp.140-149.
12.Chan TL, Leung CW, Jambunathan K, Ashforth-Frost S; Zhou Y, Liu MH, Heat Transfer Characteristics of Slot jet Impingement on a Semi-circular Convex surface, International Journal of Heat and Mass Transfer, 45(5), 993-1006, 2002.